Basic Info.
Usage
Dryer and Indoor Ventilation
Flow Direction
Axial Flow
Airflow
6000-9000 Cubic Meter/H
Rated Voltage
220-240V/380-415V
Protection Class
IP54/IP55
Insulation Class
Class F(155), Class H (180)
Transport Package
Carton+Pallet or Plywood
Product Description
GKF Series Axial flow fans
Product Description
GKF SERIES
1) GKF series high temperature high humidity axial ventilator fan is widely used in the painting,tobacco,wood drying,production of rubber,production of pharmaceuticals.About vented exhaust,the fan can be used in the lots of high temperature and high humidity environment,for example:the factory,the workshop,the office,the warehouse,the basement.The axial fan is unidirectional vented exhaust equipment .The fans has characteristic of resistance to high-temperature ,large air volume,high pressure,energy-efficient,low noise,convenience maintenance,etc.The gas has no more than 150mg/cbm dust and hard particles.
2) We have fans with diameters 250mm,300mm,350mm,400mm,500mm,550mm,600mm,700mm,800mm,900mm,1000mm.
3)There are three different rotational speed:2900r/min,1450r/min,960r/min.
The angle of fan can be adjusted according to the clients' requirements.
1. Max. Ambient temp: <130ºC
2. Relative humidity:≤98%
3. Can be used in the ambient of weak acid, weak alkali, vapor and no flammable gas.
4. Related voltage: 220V-240V/380V-415V
5. Related frequency: 50Hz/60Hz
6. Working Method: Continuous (S1) running
7. Cooling Method: IC411
8. Protection Class: IP54/IP55
9. Insulation Class: Class F(155ºC),Class H(180ºC)
10. Motor: High temperature high Humidity
11. Blades material : Aluminum alloy/Stainless steel
12. Pipe: Iron/Aluminum alloy/ Stainless steel
1. Nut of Cover | 2. Spacer | 3. Screw | 4. Front Wheel hub |
5. Blade | 6. Rear wheel hub | 7. Rear Screw | 8. Nameplate |
9. Tip marked | 10. Marked shift | 11. Air duct | 12. Key |
13. Motor | 14. Foot screw | 15. Shells pad | 16. Screw nut |
Product Parameters
Item No. | Diameter | Speed (rpm) | Motor No. | Power (KW) | Total pressure (Pa) | Hydrostatic (Pa) | Air Volume(m³/min) | No. of blades | Noise |
2.5 | 250mm | 2900 | 631-2 | 0.18 | 120-160 | 40-110 | 2200-1400 | 4 | ≤64 |
632-2 | 0.25 | 130-170 | 50-116 | 2500-1500 | 4 | ≤65 |
1450 | 631-4 | 0.12 | 55-60 | 20-28 | 1600-1000 | 4 | ≤59 |
3 | 300mm | 2900 | 632-2 | 0.25 | 120-180 | 80-150 | 3200-1800 | 4 | ≤68 |
633-2 | 0.37 | 140-200 | 90-170 | 3500-2000 | 4 | ≤68 |
1450 | 631-4 | 0.12 | 60-80 | 30-60 | 2200-1200 | 4 | ≤61 |
3.5 | 350mm | 2900 | 711-2 | 0.37 | 200-250 | 130-200 | 4500-2500 | 4 | ≤71 |
712-2 | 0.55 | 250-280 | 150-220 | 5200-3000 | 4 | ≤72 |
1450 | 711-4 | 0.25 | 80-100 | 35-65 | 3500-2200 | 4 | ≤63 |
4 | 400mm | 2900 | 712-2 | 0.55 | 230-300 | 145-250 | 5500-3000 | 4 | ≤73 |
801-2 | 0.75 | 250-330 | 145-270 | 6500-4000 | 4 | ≤74 |
802-2 | 1.1 | 270-380 | 150-320 | 7500-5000 | 6 | ≤75 |
1450 | 711-4 | 0.25 | 80-106 | 40-80 | 4300-2500 | 4 | ≤66 |
712-4 | 0.37 | 100-120 | 50-95 | 5000-2800 | 6 | ≤68 |
801-4 | 0.55 | 110-130 | 70-90 | 5200-3200 | 6 | ≤68 |
5 | 500mm | 2900 | 90S-2 | 1.5 | 250-450 | 450-420 | 8500-5200 | 4 | ≤90 |
90L-2 | 2.2 | 300-550 | 200-500 | 10000-6000 | 4 | ≤90 |
100L-2 | 3 | 400-600 | 250-550 | 12000-7000 | 4 | ≤90 |
1450 | 712-4 | 0.37 | 110-140 | 70-114 | 7000-4500 | 4 | ≤85 |
801-4 | 0.55 | 115-150 | 75-120 | 7500-5000 | 4 | ≤70 |
802-4 | 0.75 | 140-170 | 80-137 | 8700-5400 | 6 | ≤74 |
802-4 | 0.75 | 190-210 | 110-170 | 9000-6000 | 8 | ≤75 |
90S-4 | 1.1 | 200-220 | 135-175 | 9500-6000 | 8 | ≤76 |
960 | 801-6 | 0.37 | 84-92 | 60-77 | 6300-4300 | 8 | ≤63 |
5.5 | 550mm | 1450 | 802-4 | 0.75 | 180-210 | 120-160 | 10000-6500 | 4 | ≤74 |
90S-4 | 1.1 | 190-210 | 190-210 | 11000-7500 | 6 | ≤75 |
960 | 801-6 | 0.37 | 80-88 | 50-73 | 7300-5000 | 6 | ≤65 |
6 | 600mm | 2900 | 100L-2 | 3 | 250-650 | 150-560 | 14500-8000 | 4 | ≤94 |
112M-2 | 4 | 400-700 | 250-630 | 18000-1000 | 8 | ≤94 |
1450 | 90S-4 | 1.1 | 195-220 | 130-180 | 12500-7500 | 4 | ≤76 |
90L-4 | 1.5 | 250-280 | 160-230 | 14500-900 | 6 | ≤78 |
100L1-4 | 2.2 | 270-310 | 180-230 | 16000-10000 | 8 | ≤80 |
960 | 801-6 | 0.37 | 90-100 | 70-80 | 8500-5000 | 6 | ≤66 |
802-6 | 0.55 | 105-114 | 80-95 | 9600-6000 | 6 | ≤68 |
7 | 700mm | 1450 | 90L-4 | 1.5 | 170-250 | 100-210 | 18000-11000 | 4 | ≤78 |
100L1-4 | 2.2 | 200-275 | 120-230 | 20500-13000 | 4 | ≤80 |
100L2-4 | 3 | 265-370 | 150-310 | 21500-13500 | 6 | ≤82 |
960 | 90S-6 | 0.75 | 90-120 | 60-96 | 14000-9000 | 4 | ≤71 |
90L-6 | 1.1 | 100-130 | 65-98 | 15000-10000 | 6 | ≤74 |
8 | 800mm | 1450 | 100L1-4 | 2.2 | 200-320 | 100-280 | 25000-16000 | 6 | ≤80 |
100L2-4 | 3 | 220-340 | 110-290 | 29000-20000 | 8 | ≤82 |
112M-4 | 4 | 300-400 | 170-340 | 32000-22000 | 8 | ≤86 |
132S-4 | 5.5 | 320-420 | 175-360 | 35000-25000 | 8 | ≤87 |
960 | 100L-6 | 1.5 | 130-175 | 75-150 | 21000-14500 | 8 | ≤78 |
112M-6 | 2.2 | 140-190 | 78-155 | 24000-16500 | 8 | ≤80 |
9 | 900mm | 1450 | 132S-4 | 5.5 | 300-450 | 180-370 | 37000-24000 | 8 | ≤88 |
132M-4 | 7.5 | 320-470 | 185-380 | 40000-27000 | 8 | ≤89 |
160M-4 | 11 | 330-480 | 190-385 | 42000-30000 | 8 | ≤89 |
960 | 112M-6 | 2.2 | 170-205 | 105-150 | 26500-15000 | 6 | ≤82 |
132S-6 | 3 | 180-230 | 110-180 | 29000-18000 | 8 | ≤83 |
132M1-6 | 4 | 210-250 | 127-210 | 32000-21000 | 8 | ≤83 |
132M2-6 | 5.5 | 250-320 | 150-262 | 36000-23000 | 8 | ≤83 |
10 | 1000mm | 1450 | 132S-4 | 5.5 | 330-470 | 200-400 | 42000-34000 | 8 | ≤90 |
132M-4 | 7.5 | 350-480 | 210-410 | 46000-38000 | 8 | ≤91 |
160M-4 | 11 | 400-500 | 220-415 | 52000-43000 | 8 | ≤92 |
160L-4 | 15 | 490-610 | 230-480 | 56000-46000 | 8 | ≤93 |
180M-4 | 18.5 | 500-640 | 260-500 | 60000-48000 | 8 | ≤94 |
960 | 132M1-6 | 4 | 200-230 | 130-180 | 33000-21000 | 8 | ≤85 |
132M2-6 | 5.5 | 260-290 | 160-250 | 40000-27000 | 8 | ≤85 |
730 | 132S-8 | 3 | 160-180 | 110-135 | 32000-20000 | 8 | ≤83 |
160M1-8 | 4 | 170-220 | 115-145 | 38000-26000 | 8 | ≤83 |
Double Speed Item No. | Diameter | Speed (rpm) | Power (KW) | Total pressure (Pa) | Hydrostatic (Pa) | Air Volume(m³/min) | Noise |
5 | 500mm | 960/1450 | 0.55/0.75 | 92/210 | 75/170 | 6000/9000 | ≤65/74 |
6 | 600mm | 960/1450 | 0.75/1.1 | 95/220 | 78/180 | 8300/12500 | ≤66/76 |
7 | 700mm | 960/1450 | 1.5/2.2 | 110/260 | 100/230 | 13200/20000 | ≤74/80 |
8 | 800mm | 960/1450 | 3.0/4.0 | 165/400 | 120/330 | 19800/30000 | ≤78/86 |
9 | 900mm | 960/1450 | 4.0/5.5 | 175/430 | 150/360 | 23760/36000 | ≤83/88 |
10 | 1000mm | 960/1450 | 4.0/7.5 | 200/480 | 180/410 | 28000/42000 | ≤85/91 |
INSTALLATION DIMENSIONS
Workshop
Packing
Address:
Room 422, Jinnanmen Business Zone, Jiaocheng District, Ningde City, Fujian Province, Ningde, Fujian, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Tools & Hardware
Management System Certification:
ISO 9000, ISO 14000
Company Introduction:
Fujian Diamond Electrical & Mechanical Equipment Co., Ltd specializes in the research, design, manufacturing, and marketing of Industrial HVLS fans, diesel generator set and biogas generator set for more than 10 years.
Fan range: Hvls ceiling fan with pmsm diameter from 3m-7.3m, mobile large fan 1.2m-2m and large wall mounted fan 0.6m-1.53m.
Generator set range: Diesel generator 20kw-2200kw and biogas generator. We offer open type, silent type and container type.
On average, we sell about 6000 fans every year, 3000 fans in North America, 1000 fans in Southeast Asia, 2000 fans in Europe and other countries.
Our Service:
Provide Ventilation Solution. Grab the dimensions of the space-length, width, and ceiling height, we will help you design the right solution.
Provide Great fans at Great prices. 100% test before delivery to ensure product quality.
Shipping Assistance. If you need us to ship the goods to your country, we will deliver the goods to the port you tell ( Whatever EXW, FOB, CNF, CIF or DDP, we always find the cheapest way for you to save money on your side).
After-sale Service. Provide detailed installation video. In warranty period, if any parts is broken, we provide spare parts for free; Over warranty period, we provide spare parts with best price. We provide technical support and related accessories for the whole goods service time.